Essential Pet Products

This is a 1,000 foot roll of

This is a 1,000 foot roll of Heavy Duty 14 Gauge Solid Core Pe

This is a 500 foot roll of Heavy Duty 14 Gauge Solid Core Pet

This is a 1,000 foot roll of Heavy Duty 16 Gauge Solid Core Pe

This is a 500 foot roll of Heavy Duty 16 Gauge Solid Core Pet

This is a 1,000 foot roll of Heavy Duty 16 Gauge Solid Core Pe

This is a 500 foot roll of Heavy Duty 16 Gauge Solid Core Pet

This is a 1,000 foot Pet Fence Wire & Flag Kit. It includes 1,000 feet of Heavy Duty - Solid Core Pet Fence Wire and 100 Pet Fence Flags. This is enough wire and flags to enclose 1 acre. We recommend Heavy Duty Pet Fence wire in any areas where the wire may experience wear and tear such as rocky conditions or cold weather climates.

Our 1,000 foot Heavy Duty Pet Fence Wire and Flag Kit can be used for any brand ofnderground fence.

This is a 500 foot Pet Fence Wire & Flag Kit. It includes 500 feet of Heavy Duty - Solid Core Pet Fence Wire and 50 Pet Fence Flags. This is enough wire and flags to enclose 1/3 to 1/2 acre. We recommend Heavy Duty Pet Fence wire in any areas where the wire may experience wear and tear such as rocky conditions or cold weather climates.

Our 500 foot Heavy Duty Pet Fence Wire and Flag Kit can be used for any brand of underground pet fence.

The Ultimate Waterproof Underground Pet Fence Splice! Just squeeze and lock to hydraulically pump and pack waterproofing silicone.

Pre-filled silicone fully encapsulates all bare wires, closing all entryways against moisture and corrosion. A double O-ring seal bars water from creeping in, and latches lock the connector around the wires.

Features:

• Silicone covers all bare wires
• Seals our moisture and corrosion
• Double O-ring seal

This is a 1,000 foot roll of

This is a 500 foot roll of H

Twisted wire is used in almost all electric pet fence installations. Twisting two dog fence wires together creates a neutral wire that your dog can cross without receiving a warning or correction. The most common use of twisted wire is for connecting t

This is a 500 foot roll of H

This is a 1,000 foot roll of

This is a 500 foot roll of H

This is a 1,000 foot roll of Heavy Duty - Solid Core Pet Fence Wire. This is enough wire to enclose 1 acre. We recommend Heavy Duty Pet Fence wire in any areas where the wire may experience wear and tear such as rocky conditions or cold weather climates.

Our 1,000 foot Heavy Duty Pet Fence Wire and Flag Kit can be used for any brand of underground pet fence.

This is a 500 foot roll of Heavy Duty - Solid Core Pet Fence Wire. This is enough wire to enclose 1/3 to 1/2 acre. We recommend Heavy Duty Pet Fence wire in any areas where the wire may experience wear and tear such as rocky conditions or cold weather climates.

Our 500 foot Heavy Duty Pet Fence Wire and Flag Kit can be used for any brand ofunderground pet fence.

The 3 Volt Lithium Battery is compatible with the following products:

• Pawz Away Outdoor Pet Barrier
• Pawz Away Indoor Pet Barrier
• Pawz Away Receiver Collar
• Innotek Small Dog Remote Training Collar
• PetSafe Deluxe Big Dog Shock Collar
• PetSafe Deluxe Little Dog Shock Collar

You will receive two (2) batteries for the price of one! The 9 Volt Battery is used in a variety of PetSafe Bark Collars, PetSafe Dog Fence Collars and Dog Training Collars. Panasonic super heavy duty batteries - Reliable battery technology. Battery brand may vary.

Cut Your Underground Dog Fence Installation Time in HALF & Avoid The Back Breaking Task of Burying Wire.
There is no need to spend a weekend burying the wire underground, or paying some one hundreds of dollars to bury the boundary wire when it can be installed above ground in only a matter of an hour or two. Each Box contains 100 Staples - enough to install 500 feet of wire. Our Pet Fence Stable can be used;for any brand of underground pet fence.

Using our Pet Fence Staples;you can "Staple" the wire to the ground. Within a matter of 7 - 14 days the root system of your lawn will grow over the wire and hide it completely from view, essentially "Burying" it into the lawn. Not only does this make the installation of your new pet containment systems hassle free, it also eliminates any potential loss of signal that may result from burying the boundary wire under several inches of dirt, not to mention the backaches and blisters it will save you.

Using Dog Fence Staples is Quick & Easy

Step 1:

1. First run your twisted wire from your transmitter out to the beginning of your boundary.
2. Now "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
3. Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? If not go and "Staple" any raised areas before proceeding to the next step. The wire MUST completely touch the ground.

Step 2:

1. Next, place a "Staple" where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
2. Now walk the wire to the first corner of your boundary and "Staple" it to the ground. Repeat this step for all four corners of your boundary.
3. Next go back just as you did with your twisted wire and "Staple" any raised areas down until they are completely flush with the ground.

It is that simple.

You have no need to worry about people tripping over the wire because it is completely flush to the ground and will be completely hidden within 7-10 days. You also do not need to worry about your lawnmower cutting the wire as the blades will never get anywhere near the wire. Nobody cuts their lawns to shorter than an inch, with the vast majority of people keeping them at 2" - 3" inches, the wire is flush to the ground and cannot be cut.

These instructions will not be included with your pet fence. You should print this page if you are going to use the Above Ground Installation method.

There are really only a couple of instances where burying the wire is preferable.

1. If you are putting a fence into a pasture area where livestock such as horses or cattle will frequent, then you will want to bury the wire as their hooves will create breaks. In this case you will want the wire at least 8 - 10 inches underground.

2. If you frequently have your yard aerated you will want the wire at least 5 - 6 inches in the ground. Although if you do an above ground installation you can simply avoid the exterior boundaries when performing the aeration.

Twisted wire is used in almost all electric pet fence installations. Twisting two dog fence wires together creates a neutral wire that your dog can cross without receiving a warning or correction. The most common use of twisted wire is for connecting t

Twisted wire is used in almost all electric pet fence installations. Twisting two dog fence wires together creates a neutral wire that your dog can cross without receiving a warning or correction. The most common use of twisted wire is for connecting t

Twisted wire is used in almost all electric pet fence installations. Twisting two dog fence wires together creates a neutral wire that your dog can cross without receiving a warning or correction. The most common use of twisted wire is for connecting t